Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
366 Configuration Manual, 08/2018, C79000-G8976-C267-13
Description of the displayed boxes
The page contains the following boxes:
●
RADIUS Authorization Mode
For the login authentication, the RADIUS authorization mode specifies how the rights are
assigned to the user with a successful authentication.
– Conventional
In this mode the user is logged in with administrator rights if the server returns the
value "Administrative User" to the device for the attribute "Service Type". In all other
cases the user is logged in with read rights.
– SiemensVSA
In this mode the assignment of rights depends on whether and which group the server
returns for the user and whether or not there is an entry for the user in the table
"External User Accounts".
The table has the following columns:
●
Select the row you want to delete.
●
Enter the IPv4 address or the FQDN (Fully Qualified Domain Name) of the RADIUS
server.
●
Here, enter the input port on the RADIUS server. As default, input port 1812 is set. The
range of values is 1 to 65535.
●
Enter your access ID here. The range of values is 1...128 characters
●
Enter your access ID again as confirmation.
●
Here, enter the maximum number of retries for an attempted request.
The initial connection attempt is repeated the number of times specified here before
another configured RADIUS server is queried or the login counts as having failed. As
default 3 retries are set, this means 4 connection attempts. The range of values is 1 to 5.
●
Using the options in the drop-down list, specify whether or not this server is the primary
server. You can select one of the options "yes" or "no".
To Next Page
Loading...
