To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE X101-1LD and is the answer not in the manual?
General| Product Type | Media Converter |
|---|---|
| Product type designation | SCALANCE X101-1LD |
| Manufacturer | Siemens |
| Model | SCALANCE X101-1LD |
| Fiber optic port | Yes |
| Number of ports | 2 |
| Network Standard | IEEE 802.3 |
| Operating voltage | 24 V DC |
| Power consumption, typ. | 2.5 W |
| Protection class IP | IP30 |
| Mounting type | DIN rail |
| Storage Temperature | -40 °C to +85 °C |
| Humidity | 5 to 95% (non-condensing) |
| Dimensions W x H x D | 40 x 100 x 87 mm |
| Certifications | CE, UL |
| Ports | 1 x 10/100 Mbit/s RJ45 port, 1 x 100 Mbit/s LC port single mode |
| Data Transfer Rate | 10/100 Mbps |
| Power Supply | 24 V DC |
| Operating Temperature | -40 °C to +70 °C |
Explains the RJ-45 connector pinout, cable lengths, and autonegotiation for TP ports.
Describes the fiber optic port specifications, including transmission speed, medium, and range for SCALANCE X101-1.
Outlines the procedure and restrictions for connecting two media converters in series.
Provides step-by-step instructions for mounting the device onto a 35 mm DIN rail.
Details how to connect the power supply, including redundant connections and voltage requirements.
Lists detailed technical specifications for the SCALANCE X101-1, including order number, connectors, and cable lengths.
Presents the technical specifications for the SCALANCE X101-1LD, covering optical parameters and electrical data.
Details ATEX classification, relevant standards, and warnings for use in hazardous areas.
Outlines IECEx classification and standards met by the products for explosion protection.
Lists the FM approval standards and classifications for hazardous locations.
Specifies cULus standards and classifications for hazardous locations, including temperature classes.
