Need help?Do you have a question about the Siemens SED2-3/32B and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Communication Interface | Modbus RTU |
| Operating Temperature | -10...+50 °C |
| Storage Temperature | -40...+70 °C |
| Relative Humidity | 95% non-condensing |
| Input Voltage | 3-Phase 380...480 V AC -15%/+10% |
General warnings about hazardous voltages, rotating parts, and unauthorized personnel.
Outlines safety requirements for authorized personnel during commissioning.
Details safety precautions to be taken during VSD operation.
Specifies safety requirements for authorized personnel during VSD repairs.
Covers safety instructions for connecting mains and motor cables.
Provides a pre-start checklist for VSD installation and safety.
Outlines different modes for commissioning the VSD.
Describes the quick commissioning procedure using parameters.
Guides on entering motor data for VSD parameterization.
Details the procedure for factory resetting VSD parameters.
Explains how to access and navigate VSD parameters.
Details specific functions for HVAC applications.
Explains the function and programming of digital inputs.
Describes the use and configuration of analog inputs.
Explains the PID controller for temperature, pressure, and speed control.
Provides guidance for troubleshooting VSD issues via the operator panel.
Lists and explains error codes, their causes, and remedies.
Lists common error codes, their causes, and recommended diagnostic steps.
Lists common warning codes, their causes, and recommended diagnostic steps.
To Next Page