Need help?Do you have a question about the Siemens SED2-2.2/32B and is the answer not in the manual?
General| Rated Power | 2.2 kW |
|---|---|
| Output Current | 5.2 A |
| Protection Class | IP20 |
| Cooling Method | Fan |
| Communication Interface | USS, Modbus RTU |
| Operating Temperature | -10°C to +50°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000 m above sea level without derating |
Provides information for mounting, installing, commissioning, and parameterizing SED2 VSDs.
Contains general warnings, preventive measures, and danger warnings for VSD work.
Provides safety guidelines for VSD setup, installation, and commissioning.
Details safety aspects during operation of SED2 variable speed drives.
Covers essential guidelines and safety precautions for mounting the VSD.
Explains how to connect mains and motor power terminals.
Provides a pre-start checklist for VSD installation and setup.
Provides guidance on diagnosing VSD issues using the operator panel.
Lists and explains error codes and warning codes for SED2 VSDs.
To Next Page