Siemens SENTRON 7KT1681

Description
3.4 Parameterization
7KT multimeter
Manual, 08/2018, 2514284149-01
31
P02.10
Permits the measurement and display of energies according to individual
phases.
P02.11
Permits the measurement and display of voltage and current unbalances.
P02.12
Activates the measurement and display of voltage and
current THDs (% har-
monic distortion) and display of the harmonics for current and voltage (2 ... 15).
P02.13
Permits the calculation and display of phase shift.
P02.14
In the event of an alarm, the display backlighting flashes to annunciate the
fault.
M03 Password
Unit
Default
Range
P03.01 Enable password – OFF
• OFF
• ON
P03.02
User-level password
1000
0 … 9999
P03.03
Administrator password
2000
P03.01
When OFF is set, the password setting is deactivated and access to settings
and the command menu is unrestricted. You can find more information in
chapter Command menu (Page 36).
P03.02
Sets the user password.
P03.03
Sets the password for extended access privileges.