Need help?Do you have a question about the Siemens SENTRON 7KT1682 and is the answer not in the manual?
General| Design of display | digital |
|---|---|
| Type of measured value display | LCD |
| Measurement Category | CAT III 600 V |
| Voltage Range AC | 600 V |
| Voltage Range DC | 600 V |
| Current Range AC | 10 A |
| Current Range DC | 10 A |
| Safety Standards | EN 61010-1 |
| Measuring category | CAT III 600 V |
| Storage Temperature | -20°C to +70°C |
Outlines the requirements and responsibilities for personnel performing tasks on the device.
Details critical safety warnings regarding electric shock, hazardous voltage, and damaged devices.
Describes the current and voltage measurement capabilities and limitations of the device.
Details the basic properties, versions, and key features of the 7KT PAC1600 multimeter.
Guides users through setting up device parameters via the front panel.
Details the step-by-step process for accessing and modifying device parameters using the front panel interface.
Describes the process of mounting and installing the multimeter onto a TH35 rail.
Illustrates various wiring configurations for connecting the multimeter to different power systems.
Explains how to apply the necessary measuring voltage to power and operate the device.
Guides users through configuring the device using the powerconfig software.
Provides troubleshooting steps for common device faults and issues.
Presents detailed technical specifications including auxiliary power, input voltage, and current characteristics.
To Next Page
