Description
3.6 Supporting software
7KT multimeter
38 Manual, 08/2018, 2514284149-01
● Demand curve
● Reporting, different report types (e.g. cost center report)
● Load monitoring of reaction plans
● Power peak analysis (available as of powermanager V3.0 SP1)
● Support of distributed plants (systems)
● Archiving system
● User administration
The powerconfig software is the combined commissioning and service tool for
communication-capable measuring devices and circuit breakers from the SENTRON family.
The PC-based tool facilitates parameterization of the devices and saves a great deal of time,
particularly when several devices need to be set up.
You can use powerconfig to parameterize and operate the measuring devices via
communications interfaces, and to document and monitor measured values.
● The software combines the following functions:
– Parameterization
– Documentation
– Operation
– Monitoring
● User-friendly documentation of settings and measured values
● Clear presentation of the available parameters including plausibility testing of the input
values
● Display of the available device statuses and measured values in standardized views
● Project-oriented storage of device data
● Consistent operation and usability
● Support of the various communication interfaces (Modbus RTU, Modbus TCP,
PROFIBUS, PROFINET)
● Updating of device firmware (device-dependent)
● Loading of language packs (device-dependent)
Note
You launch the Online Help in powerconfig by pressing the
F1 key.
To Next Page
Loading...