1.Set to “ ” 3. keep selected and
4. 1 step to right
5.release and find
the number from
0 to 4
ii
The number means the
volume from “off ” to
maximum
6. Button signals.* 6. 1 step to right 7. Information signals*
After setting, turn the programme selector to
“ ”, the volume of signal is stored.
_
_
Signal
The acoustic signal indicates:
that the additional functions (buttons ) have been
switched on or off,
Individual programme statuses (e.g. Start of
programme, end of programme), operating errors
and faults.
Start the signal mode
2. 1 step to right
Set volume for...
or
* If required, set repeatedly.
28
To Next Page
Loading...
