_
_
51
Transport e.g. when
moving
Before transporting the washing machine:
Turn off the water tap,
Drain any residual washing solution (refer to
Page 34),
Release the water pressure in the supply hose
(refer to Page 36),
Disconnect the washing machine from the mains,
Dismantle the supply and drainage hose,
Install the transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the “Drain”
programme to run through before starting the first
washing programme.
_
_
_
_
Preparing and
inserting the
transport bolts
Remove the covers C.
Remove the back panel D (see Page 44),
preparing the transit bolt.
Insert and tighten the bolts.
To Next Page
Loading...
