Aligning the
washing machine
Align the washing machine with the aid of the four
height-adjustable feet and a spirit level.
Loosen lock nut 1 in a clockwise direction with
a spanner.
Adjust the height by rotating height-adjustable
foot 2.
Tighten lock nut 1 against the housing; grip the
foot and do not adjust the height.
All four appliance feet must be situated firmly on
the ground. The washing machine must not wobble.
The lock nuts on all four appliance feet must be
tightened against the housing.
Attention
Loud noises, vibrations and “wandering” may be
due to incorrect alignment!
49
Caution
Do not bend or pull the water drainage hose.
Height between the placement area and drainage
point:
maximum 100cm
Water Drainage
Caution
Drainage into a wash basin( The hose elbow is in
the drum).
The plug must not block the drain of the wash basin.
Secure the water drainage hose so that it does
not slide out.
When water is being drained, check that the
water flow is fast enough.
To Next Page
Loading...
