Commissioning
SIMATIC Rack PC IL 40, Getting Started
A5E00171493-02
2-7
4. Remove the CD-ROM from the drive after installation.
5. Restart your PC.
Initial Startup
Note
The procedure below describes, as an example, the first commissioning of a
Rack PC IL with the operating system Windows 2000, German.
The start-up window of the operating system appears.
In case of new hardware, the dialog for hardware installation appears. Confirm the
hardware installation.
The start-up window of the operating system reappears. Select and confirm your
system settings. The Rack PC IL is booted.
After restart
• the time zone must be set and
• the license contract must be confirmed.
Confirm your settings – the system settings are updated now.
Then, the date/time dialog is opened. Enter the correct date/time, if necessary, and
confirm your settings.
Close Windows and restart the Rack PC to fully integrate the upgraded.
To Next Page
Loading...
