Introduction 1
IMPORTANT:
The information contained herein is general in nature and not intended for
specific application purposes. It does not relieve the user from responsibility
to use sound practices in application, installation, operation and
maintenance of the purchased motor. SIEMENS reserves the right to make
changes in the specifications shown herein or to make improvements at any
time without notice or obligations.
NOTE:
These instructions do not purport to cover all details or variations in
equipment, nor provide information for every possible contingency to be met
in installation, operation, or maintenance. Should further information be
desired about a specific topic or inconvenience, contact the local SIEMENS
sales office. The contents of this instruction manual shall not become part of
or modify any prior or existing agreement, commitment or relationship. The
sales contract contains the entire obligation of SIEMENS. The warranty
contained in the contract between the parties is the sole warranty of
SIEMENS. Any statements contained herein do not create new warranties or
modify the existing warranty.
IMPORTANT:
The procedures described in this document must be carried out by qualified
personnel.
For the purpose of this manual a qualified person is one who is familiar with
the installation, construction and operation of the motor and the hazards
involved. In addition, this person has the following qualifications:
(a) Is trained and authorized to de-energize, energize, clear, ground, and tag
circuits and equipment in accordance with established safety practices.
(b) Is trained in the proper care and use of protective equipment such as
rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc., in
accordance with established safety practices.
(c) Is trained in rendering first aid.
To Next Page
Loading...
Need help?
General