Unrestricted 57 A5E43486667A_AB
Safe handling:
Workplace safety depends on the attentiveness, care, and common
sense of the personnel who install, operate, and maintain the machine. In
addition to the safety measures cited, as a matter of principle, the use of
caution is necessary when you are near the machine. Always pay attention
to your safety.
Also observe the following to prevent accidents:
● General safety regulations applicable in the country where the
machine is deployed.
● Manufacturer-specific and application-specific regulations
● Special agreements made with the operator
● Separate safety instructions supplied with the machine
● Safety symbols and instructions on the machine and its packaging
PARTS UNDER ELECTRICAL TENSION
Live parts
Electric machines contain live parts.
Fatal or severe injuries and substantial material damage can occur if the
covers are removed or if the machine is not handled, operated, or
maintained properly.
● Always observe the “five safety rules" (Page 14) when carrying out
any work on the machine.
● Only remove the covers using the methods described by these
operating instructions.
● Operate the machine properly.
● Regularly and correctly maintain the machine.
Rotating parts
Electric motors contain dangerous rotating parts.
Fatal or severe injuries and substantial material damage can occur if the
covers are removed or if the motor is not handled, operated, or maintained
properly.
To Next Page
Loading...
