Siemens SIMOTICS XP 1LG6 User Manual

Siemens SIMOTICS XP 1LG6 Specifications

General

Motor series	1LG6
Cooling Method	IC411
Degree of protection	IP65
Mounting Type	IM B3, IM B5
Frequency	50 Hz, 60 Hz
Protection Class	IP55
Voltage	230/400 V, 400/690 V

Summary

Safety Notes for Operation

Plant Responsibility and General Safety

Five Safety Rules and Personnel

Details fundamental safety rules and qualified personnel requirements.

Critical Hazard Warnings

Alerts to hazards like live parts, rotating components, hot surfaces, and chemical risks.

Converter and Ex Machine Conditions

Addresses interference voltages from converters and special conditions for Ex machines.

Machine Description and Regulations

Explosion-Proof and Eurasian Regulations

Preparing for Use

Plant Configuration Safety Aspects

Transport and Storage Procedures

Converter Operation Guidelines

Covers operational aspects and parameterizing converters with the machines.

Insulated Bearings and Couplings

Details the use of insulated bearings and couplings for operation.

Installation Procedures

Installation Preparation and Requirements

Insulation Resistance Testing

Explosion-Proof Machine Installation and Cooling

Specific installation guidelines for Ex machines, including cooling.

Balancing and Alignment Procedures

Electrical Connection Guidelines

Machine Connection and Terminal Box

Procedures for connecting the machine, terminal box, and cable glands.

Torque Specifications and Grounding

Conductor and Converter Connections

Final Electrical Checks

Commissioning Procedures

Pre-Commissioning Measures

Outlines essential checks and measures before the initial machine run.

Operation and Fault Management

Machine Startup and Fault Identification

Safety for Ex Machines in Operation

Critical safety information for operating explosion-protected machines.

Maintenance Procedures

Inspection and Maintenance Safety

Details safety precautions for performing inspection and maintenance tasks.

Re-greasing, Cleaning, and Repair