Siemens SIMOTICS XP 1LG6 - Explosion-Proof and Eurasian Regulations

Description
Explosion-protected machines
84 56100000002002, 01/2016
Table 3-1 Applicable general regulations
Feature
Standard
Dimensioning and operating behavior
EN / IEC 60034-1
Procedure for determining the losses and the efficiency of
rotating electrical machines and inspections
EN / IEC 60034-2-1
EN / IEC 60034-2-2
EN / IEC 60034-2-3
Degree of protection
EN / IEC 60034-5
Cooling
EN / IEC 60034-6
Type of construction
EN / IEC 60034-7
Terminal designations and direction of rotation EN / IEC 60034-8
Noise emission
EN / IEC 60034-9
Starting characteristics of rotating electrical machines EN / IEC 60034-12
Vibration severity grades
EN / IEC 60034-14
Efficiency classification of three-phase squirrel-cage in-
duction motors
EN / IEC 60034-30
IEC standard voltages
IEC 60038
3.3 Regulations for explosion-proof machines
Supplementary regulations for explosion-proof machines
Table 3-2 Regulations applied for explosion-protected machines
Feature
Standard
Electrical equipment for hazardous gas atmospheres,
Part 0: General requirements
EN / IEC 60079-0
Electrical equipment for hazardous gas atmospheres,
Part 7: Increased safety "e"
EN / IEC 60079-7
Electrical equipment for hazardous gas atmospheres,
Part 14: Electric installations for endangered atmos-
pheres (except underground excavation)
EN / IEC 60079-14
Electrical equipment for hazardous gas atmospheres,
Part 15: Type of protection "n"
EN / IEC 60079-15
Electrical equipment for hazardous gas atmospheres,
Part 19: Repairs and overhauls
EN / IEC 60079-19