Siemens SIMOTICS XP 1LG6 - Page 13

Description
Explosion-protected machines
56100000002002, 01/2016
85
Feature
Standard
Potentially explosive atmosphere - Part 31: Device dust
explosion protection by enclosure "t"
EN / IEC 60079-31
Electrical equipment for use in the presence of combus-
tible dust - Part 17: Inspection and maintenance of elec-
trical systems in hazardous areas (except underground
excavation)
EN / IEC 60079-17
Directive on the approximation of the laws of the Member
States concerning equipment and protective systems
intended for use in hazardous areas.
Directive 94/9/EC (up to
April 19, 2016)
Directive 2014/34/EU
(from April 20, 2016)
3.4 Regulations of the customs union Eurasia
Table 3-3 Applicable general regulations
Feature
Standard
EAC
Dimensioning and operating be-
havior
EN / IEC 60034-1 GOST R IEC 60034-1
Procedure for determining the
losses and the efficiency of rotating
electrical machines and inspec-
tions
EN / IEC 60034-2-1
EN / IEC 60034-2-2
EN / IEC 60034-2-3
GOST R IEC 60034-2-1
GOST R IEC 60034-2-2
GOST RIEC 60034-2-3
Degree of protection
EN / IEC 60034-5
GOST R IEC 60034-5
Cooling
EN / IEC 60034-6
GOST R IEC 60034-6
Type of construction
EN / IEC 60034-7
GOST R IEC 60034-7
Terminal designations and direc-
tion of rotation
EN / IEC 60034-8 GOST R IEC 60034-8
Noise emission
EN / IEC 60034-9
GOST R IEC 60034-9
Starting characteristics of rotating
electrical machines
EN / IEC 60034-12 GOST R IEC 60034-12
Vibration severity grades
EN / IEC 60034-14
GOST R IEC 60034-14
Efficiency classification of three-
phase squirrel-cage induction
motors
EN / IEC 60034-30 GOST R IEC 60034-30
IEC standard voltages
IEC 60038
GOST R IEC 60038