Siemens SIMOTICS XP Operating Instructions Manual

Unrestricted 89 A5E43486667A_AB
This checklist does not represent an exhaustive survey of
maintenance steps necessary to ensure safe operation of the equipment.
Particular applications may require further procedures. Should further
information be desired or should particular problems arise which are not
covered sufficiently for the purchaser’s purposes, the matter should be
referred to the local SIEMENS sales office.
WARNING: Dangerous voltages are present in the motor which can
cause severe personnel injuries. Always disconnect and ground the
equipment before maintenance. Maintenance should be performed only by
qualified personnel.
CAUTION: The use of unauthorized parts in the repair of the
equipment, tampering by unqualified personnel, or removal or alteration of
guards or conduit covers will result in dangerous conditions which can cause
severe personal injury or equipment damage. Follow all safety instructions
contained herein.
LUBRICATION
Prior to shipment, motor bearings are lubricated with the proper
amount and grade of grease to provide six months of satisfactory service
under normal operation and conditions.
After that period, the motor must be lubricated as recommended in Table
1.2: Lubrication frequencies, where, in a general way, time intervals have
been established according to the service and atmosphere in which the
motor operates. For further information, please consult your local SIEMENS
sales office.
Lubrication
frequency.
Service/ Operation Atmosphere
6 Months
Moderate service/ Clean and dry atmosphere.
3 Months
Severe service/ Adverse atmospheres, dust,
moisture and vibrations.
Table 1.2 Lubrication frequencies.

Siemens SIMOTICS XP Specifications

General

Brand	Siemens
Model	SIMOTICS XP
Category	Engine
Language	English