Siemens SIMOTION D435-2 User Manual

NOTICE
Higher operating temperature if ventilation clearances are too small
The 80 mm clearances above and below the components must be observed.
The unit protects itself from overheating by shutting down.
The
ventilation clearance is measured from the lower edge of the module, i.e. the fan/battery
module is not included in the dimension.
Safety instructions
1.2 Specific safety information for SIMOTION D4x5-2
SIMOTION D4x5-2
Manual, 04/2014 19

Siemens SIMOTION D435-2 Specifications

General

Brand	Siemens
Model	SIMOTION D435-2
Category	Control Unit
Language	English