Table 2-8 Machine-readable identification via 2D code
Characteristic Characteristic (example)
Order No.
("1P" identifier to identify the products)
6AU1400-2PA22-0AA0‑Z
Serial number
("S" identifier, item number)
T‑WOQB02934
Hardware serial number (CF cards only)
("30S" identifier)
ST0B8365550000079001
Hardware version
(identifier 2PE)
not used in the example
Material number
(identifier P)
not used in the example
In addition to the "serial number," CF cards also have a "hardware serial number."
If licenses are purchased for functions under license, a "license key" is generated from the
hardware
serial number of the CF card and the serial number of the purchased licenses, which
is only valid for the respective CF card.
The data required for the licensing can be read by reader unit via the bar codes on the license
certificates (Certificate of License "CoL") and the 2D code on the CF card in order, for example,
to automate the licensing process.
Description
2.9 Data matrix code
SIMOTION D4x5-2
42 Manual, 04/2014
To Next Page
Loading...
Need help?
General
