EasyManua.ls Logo

Siemens SIMOVERT MASTERDRIVES 6SE70 P Series - Technical Data; General Technical Specifications

Siemens SIMOVERT MASTERDRIVES 6SE70 P Series
58 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12.98 Technical Data
Siemens AG 6SE7087-7NP87-2DD0
SIMOVERT MASTERDRIVES Operating Instructions 7-1
7 Technical Data
EU low-voltage directives
73/23/EEC and RL93/68/EEC
EN 50178
EU directive EMC 89/336/EEC EN 61800-3
EU machine directive
89/392/EEC
EN 60204-1
Approval
UL: E 145 153
CSA: LR 21 927
Type of cooling Air cooling with built-in fan
Permissible ambient and cooling-
medium temperature
during operation
during storage
during transport
0° C to +45° C ( 32° F to 113° F)
-25° C to +70° C (-13° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
Installation altitude 1000 m above sea level (100 % load capability)
> 1000 m to 4000 m above sea level
(for load capability. see Fig. "Derating curves")
Permissible humidity rating
Relative humidity 95 % during transport and storage
85 % during operation (moisture
condensation not permissible)
Climatic class Class 3K3 to DIN IEC 721-3-3 (during operation)
Degree of pollution Pollution degree 2 to IEC 664-1 (DIN VDE 0110. Part 1).
Moisture condensation during operation is not permissible
Overvoltage category Category III to IEC 664-1 (DIN VDE 0110. Part 2)
Degree of protection IP20 EN 60529
Class of protection Class 1 to EN 536 (DIN VDE 0106. Part 1)
Shock protection to EN 60204-1 and DIN VDE 0106 Part 100 (VBG4)
Radio interference suppression
Standard
Options
to EN 61800-3
No radio interference suppression
Radio interference suppression filter for Class B1 or A1 to EN 55011
Interference immunity Industrial to EN 61800-3
Paint finish For interior installation
Mechanical specifications
- Vibrations
During stationary use:
Constant amplitude
of deflection
of acceleration
During transport:
of deflection
of acceleration
- Shocks
- Drop and topple
to DIN IEC 68-2-6
0.075 mm in the frequency range 10 Hz to 58 Hz
9.8 m/s² in the frequency range > 58 Hz to 500 Hz
3.5 mm in the frequency range 5 Hz to 9 Hz
9.8 m/s² in the frequency range > 9 Hz to 500 Hz
to DIN IEC 68-2-27 / 08.89
30 g, 16 ms half-sine shock
to DIN IEC 68-2-31 / 04.84
on a surface and on a corner
Table 7-1 General data
www . ElectricalPartManuals . com

Related product manuals