Siemens Sinteso Cerberus PRO User Manual

Sinteso™ Cerberus™ PRO
ASD Aspirating smoke detector
FDA241, FDA221
Siemens aspirating smoke detector (ASD) for the addressed FDnet/C-NET de-
tector line or for standalone operation
● Patented technology
● Early detection of a wider spectrum of particle sizes in the air
● Configuration using the USB interface or the control panel via FDCC221S (op-
tional)
● 'ASD Asyst-Tool' software to assist with pipe configuration
● Unique dust-resistant detection chamber
● Intuitive front indicator for airflow and smoke value
● Access to service functions
● Different event protocols
● Offline/online configuration supported
● Cleaning function (FDA241)
● 4…20mA output
A6V10331032_k_en_-- Smart Infrastructure
2021-06-28

Siemens Sinteso Cerberus PRO Specifications

General

Type	Optical
Power Supply	Loop powered
Storage Temperature	-30°C to +70°C
Humidity Range	<= 95 % rel. humidity
Protection Category	EN 54-7
Color	White
Certification	EN 54-7

Summary

Properties

Use

Functions

Indication

The display contains comprehensible bar graphs for smoke and airflow, plus alarm and error indicators.

Opening the detector

Service LED indicators and buttons

Normalization of airflow

Function to determine the nominal airflow for detector commissioning and normal operation monitoring.

Normalization of smoke density

Function to determine nominal air quality for commissioning and normal operation monitoring.

Reset button function

Resets detector status indicators for fire alarms or airflow events, including associated relays.

USB connection and configuration

Connects detector to a Windows PC for setup using the 'ASD Configuration Tool'.

Test function LED operation

Tests detector LEDs by holding the 'Buzzer silence' button for 5 seconds for brightness settings.

Accessories

Communication interface FDCC221S

Connects detector to FDnet/C-NET with integrated line separator and MC link interface.

Power supply kit FP120-Z1

70 W standalone power supply for external devices, with operating/fault indicator and relay contacts.

Battery FA2003-A1 (12 V, 7 Ah)

Powers fire control panels and aspirating smoke detectors. Compatible with Sinteso/Cerberus PRO.

Battery FA2004-A1 (12 V, 12 Ah)

Battery FA2005-A1 (12 V, 17 Ah)

FDAZ291 aspirator (FDA241/FDA221)

FDAZ292 ASD filter box

FDAZ292-AA ASD filter set

Type Overview

Notes

Technical data

Dimensional drawings