Need help?Do you have a question about the Siemens Cerberus DLO1191 and is the answer not in the manual?
General| Model | DLO1191 |
|---|---|
| Brand | Siemens Cerberus |
| Detection Principle | Optical |
| Power source | DC |
| Product Type | Smoke Detector |
| Humidity Range | ≤95% rel. humidity (no condensation) |
| Certification | EN 54-7 |
General guidelines for planning linear smoke detector applications.
Specifies environmental and positional requirements for correct operation.
Recommendations for distances between detector and reflector.
Advice on selecting stable and suitable installation sites.
Instructions for physically mounting the detector and reflector.
Details on wiring, special filters and detector heater.
How to configure detector settings using DIP switches.
Steps for physically aligning the detector and reflector.
Procedures for fine-tuning the detector's signal electronically.
Process for initializing the detector after installation.
Identifying and diagnosing common faults like beam interruption.
A comprehensive checklist for diagnosing problems.
To Next Page