Need help?Do you have a question about the Siemens FDA261 and is the answer not in the manual?
General| Product Type | Smoke Detector |
|---|---|
| Model | FDA261 |
| Sensor Type | Optical |
| Operating Temperature | -10°C to +55°C |
| Protection Class | IP40 |
| Test Button | Yes |
| Humidity Range | 0% to 95% RH (non-condensing) |
| Weight | 150g |
| Alarm Sound Level | 85dB at 3m |
| Standards | EN 14604 |
Outlines danger symbols, signal words, and risk presentation.
Covers electrical safety, national standards, and operational rules.
Explains the air aspiration process and variants.
Gathers essential site information for pipe system planning.
Explains using software for pipe system calculation.
Factors to consider for effective pipe system design.
Chooses pipe layout, considering symmetry, length, direction changes, and special cases.
Sets limits for detection range and pipe system planning.
Explains setting, measuring sensitivity, example calculation, and collective effect.
Discusses air pressure, topology effects, and pipe fastening.
Steps for cutting, preparing, and assembling the pipe system.
Steps for gluing pipes and fittings, including safety.
Procedures for drilling holes into pipes and end caps.
To Next Page