Siemens FDA261 - End Caps; Label for Aspirating Holes; Fastenings; Tools

3.4.3 End caps
End cap
● For fitting on a free pipe end
● The end cap is glued to the pipe
● Material: Typically PVC or ABS depending on
the ambient conditions
3.4.4 Label for aspirating holes
Example
FIRE
DETECTION
SYSTEM
DO NOT
PAINT
FIRE
DETECTION
SYSTEM
DO NOT
PAINT
SIEMENS
SIEMENS
● To identify aspirating holes on pipes
● Self-adhesive
● Dimensions: 95x24mm, hole diameter 9mm
3.4.5 Fastenings
Plastic clamp
● For attaching the pipes to the wall or ceiling
● The plastic clamps are easy to attach with just
one screw or with cable ties
● Pipe can be installed and removed without the
need for tools
● Material: Typically PVC or ABS depending on
the ambient conditions
3.4.6 Tools
Pipe cutter
● Pipe cutter for trimming the piping
3.4.7 Adhesive
● For gluing pipes to fittings
● Adhesive suitable for creating connections
with high tensile strength on ABS or PVC
pipes
System description
Pipe system components
3
24 | 48 A6V11783979_en--_a