Siemens Sinteso FD20 - FDF241-9 Flame Detector Technical Data

Special detectors
Flame detector FDF241
-
9
10
008164_y_en_-- 103 | 152
10.2.3 Technical data
Flame detector FDF241-9
Operating voltage (quiet) addressed / collective DC 12…33 V / DC 14…28 V
Operating current (quiet) addressed / collective 0.7 mA / 0.5 mA
External alarm indicator (AI)
can be connected and configured externally
2
Operating temperature -35…+70°C
Storage temperature -40…+75 °C
Air humidity (no moisture condensation) ≤95 % rel.
Communication protocol FDnet or collective (with and without current limitation)
Conductor cross section 0.2…1.5 mm²
Color ~RAL 9010 pure white
Protection category (IEC 60529) IP67
Standards EN 54-10, EN 54-17
Approvals
● VdS
● LPCB
● DNV GL (marine)
G204010
126bc/05
MEDB00003UN
System compatibility
● FDnet
● C-NET
FS20, AlgoRex, SIGMASYS
FS720, FC360
Collective system compatibility
CZ10, BC10, FC10, XC10, CS11, FC700A, FC330A,
SIGMASYS, BMS, SM80/88/D100