SWING radio fire detection system
10
008164_y_en_-- 109 | 152
Radio manual call point FDM273
● Radio manual call point can be mounted anywhere in a
radio cell
● The radio manual call point consists of a housing and a
switching unit including radio electronics and dual-band
antenna
● Indirect alarm activation by smashing the glass insert
and pressing the alarm button
● A protective cover (accessories) protects the manual
call point against the glass being broken accidentally
Supply:
● The radio manual call point FDM273 is supplied with
power by a battery pack (AA lithium batteries). The
batteries must not be inserted into the switching unit
until the time of commissioning.
Radio manual call points FDM275 and FDM275(F)
● The radio manual call points FDM275 and FDM275(F)
can be mounted anywhere in a radio cell.
● The radio manual call points consist of a back box, a
switching unit, and a battery pack.
● The alarm is activated directly by pressing the plastic
insert.
● A key is used to reset the radio manual call point and
restore readiness for operation.
● A protective cover (accessories) protects the manual
call point against accidental activation.
Supply:
● The radio manual call points FDM275 and FDM275(F)
are supplied with power by a battery pack (AA lithium
batteries). The batteries must not be inserted into the
switching unit until the time of commissioning.
To Next Page
Loading...
