Test units and accessories
Detector exchanger FDUD291
11
134 | 152 008164_y_en_--
11.1.2 Properties
● Possible to exchange the detector without a ladder or scaffolding up to a room
height of 8 m with the help of the telescope rods
● Joint springs enable the point detectors to be inserted or removed at an angle
● The point detector can be held in four rotational positions This makes it easier
to work efficiently
● Specially developed springs hold the point detector in the detector exchanger
● Compatible with
– Telescope rods FDUM291/292
– Previous straight connectors VR10/11/12/13
– MP/MT handles and straight connectors
● Environmentally friendly processing
● Reusable materials
To Next Page
Loading...
