Detector base and base attachment
Detector base FDB201, FDB202, FDB221, FDB222
3
28 | 152 008164_y_en_--
1 ● Base height: 25 mm
● When using the point detector: 60 mm
2 Opening for cable entry
3 Mounting slits
Base attachment humid FDB293
● For achieving a higher protection category
● For mounting in wet or humid environments
● Required when using detector heating unit FDBH291
● Required when using protective cage DBZ1194 or EMC-protective cage
FDBZ294
● Mounted between detector base and ceiling
● Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.
Base attachment wet FDB295
● Base attachment wet with additional integrated rubber seal for mounting in wet
or humid environments
● For achieving a higher protection category
● For mounting in wet or humid environments
● Required when using detector heating unit FDBH291
● Required when using protective cage DBZ1194
● Mounted between detector base and ceiling
● Detector base mounted quickly: The detector base simply clicks into place in
base attachment wet FDB295.
Base adapter FDB241
Function:
● For adapting AnalogPLUS and SIGMALOOP for Sinteso detector systems
● Can be set with jumper on replaced detector
120
To Next Page
Loading...
