9
96 | 152 008164_y_en_--
9.4.2 Type Overview
Type Designation Order no. Weight [kg]
FDCIO223 (ES ≥50)
Input/output module (transponder)
incl. 2 20 V voltage reference
diodes, 4 sets of terminating
resistors, 2 mounting feet, 2 jumpers
S24218-B102-A1 0.126
Accessories for the input/output module (transponder) FDCIO223
Type Designation Order no. Weight [kg]
FDCH221
Housing with cover, seal, and
screws
S54312-F3-A1 0.282
– Metal cable gland M20 x 1.5 A5Q00004478 0.036
– M20 metal counter nut A5Q00004479 0.006
DBZ1190-AB
0.5…2.5 mm
2
(3-pin) connection
terminal
BPZ:4942340001 0.001
TS35 (L = 122 mm)
TS35 (L = 288 mm)
U-rail TS35/7.5/122
U-rail TS35/7.5/288
BPZ:5644780001
BPZ:5644230001
0.041
0.098
Replacement material for the input/output module (transponder)
FDCIO223
Type Designation Order no. Weight [kg]
FDCM291 Mounting foot A5Q00003855 0.001
9.4.3 Technical data
General (irrespective of the device)
FDnet operating voltage DC 12…33 V
Operating current FDnet Max. 0.75 mA
Maximum current connection factor 3
External power supply:
● Input voltage
● Operating current without secondary load at 24 V
● Operating current with secondary load
DC 18…32 V
● 26 mA (typ.)
● 60 mA (max.)
Max. 2 A
Inputs/outputs as:
● Collective detector line/conventional detector line
– Collective detector key figures KMK
– Terminal resistance
● Control output
● Contact input
– Terminating resistor combinations
110 series, MS9, Sigmacon, AlgoRex, Synova600,
Synova300, Apollo Series 65 / Orbis or similar
32
20 V voltage reference diode or EOL22 (Ex)
DC 24 V ±5 % / max. 1x 1.5 A or 2x 1 A (fuse on 24 V
supply line and on output side)
3.3 kΩ / 680 Ω, 2.7 kΩ / 560 Ω, 3.3 kΩ
Operating temperature -25…+60 °C
To Next Page
Loading...
