Need help?Do you have a question about the Siemens SINUMERIK 840 and is the answer not in the manual?
General| Control Type | CNC |
|---|---|
| Axes | Up to 31 |
| Display | TFT color display |
| PLC | Integrated |
| HMI | SINUMERIK Operate |
| Communication Interfaces | Ethernet, PROFIBUS, PROFINET |
| Type | CNC system |
| Programming Languages | G-code |
| Max Number of Channels | 10 |
| Operating Temperature | 0 to 45 °C |
| Relative Humidity | Up to 95% (non-condensing) |
| Protection Class | IP54 (front panel) |
Details of this edition and previous editions of the SINUMERIK documentation.
Provides preliminary information and technical comments regarding the measuring cycles.
Overview of measuring tasks on CNC machines and the purpose of measuring cycles.
Classification and description of different types of touch trigger probes.
Explanation of probe signal evaluation and in-process measurement principles.
Strategies for determining and correcting dimensional deviations in machining.
Details on tolerance parameters (R33-R41) for workpiece and tool measurement.
Explanation of G17, G18, G19 and G16 for defining machining planes.
Methods and procedures for logging measurement results using logging modules.
Lists the R parameters used for transfer, display, and internal functions.
Defines offset numbers for tool memory and ZO determination.
Specifies the probe type and number for measurement cycles.
Parameter R23 selects the specific measurement variant for cycles.
Defines the measuring axis (Abscissa, Ordinate, Applicate) in the coordinate system.
Sets parameters for safe area, dimensional difference check, and zero offset.
Auxiliary cycles called directly by measuring cycles, not user-executable.
Auxiliary cycles that can also be called directly by the user.
Cycles for calibrating and measuring tool lengths and geometry.
Calibrates the workpiece probe in reference holes or on surfaces.
Measures workpiece dimensions like diameter, points, circumference, and cylinder.
Demonstrates practical applications of workpiece measurement cycles L973 and L974.
Provides recommended parameter settings for reliable program execution.
Calibrates the workpiece probe in reference holes or on surfaces for milling machines.
Measures dimensions and determines ZO for holes, shafts, slots, and webs.
Measures features like holes, shafts, slots, webs at random angles.
Measures surfaces and angles, with or without differential measurement.
Searches for the position of holes or slots on faces or cylinders.
Semi-automatic determination of tool lengths and storing in offset memory.
Determines workpiece zero offsets using a probe and stores values.
Extended version of Inprocess Measurement cycles for SINUMERIK.
Inputting parameters like drilling axis, probe number, and measuring speed.
Calibrates the probe in any hole, determining trigger points and storing them.
Overview of available measurement variants: hole, shaft, slot, web, surface, angle.
Lists alarms that can occur during measuring cycles.
Detailed explanations and remedies for various alarm numbers.
Tables detailing parameters for various measuring cycles (L970-L981).
Describes the format and content of measurement result displays.
Lists P numbers corresponding to measurement results for various cycles.
Details channel-oriented values and bits in the SDC memory.
To Next Page
