5 Measuring Cycles for Milling Machines and Machining Centres 07.90
5.3.4 L979 Measure web (at random angles)
Example: Measure web with measuring cycle L979
(Data as in Fig. 5.21)
%MPF 9794
:
Machining centre program
:
N500 G54 T200 T number probe; select ZO
N505 G00 X260 Y130 Position probe in X and
Y axes near P1
N510 Z70 D99 Position Z axis level with P1
N515 R10=2030 R11=10 R19= 35 R20=220 Define parameters for measuring cycle
R21=130 R22=1 R23= 12 R24=10
R25=0 R27=1 R28= 1 R29=3
R33=0.002 R34= 0.03 R36=1
R37=0.06 R40=0.03 R41=-0.03 R42=100
N525 L979 Cycle call for web measurement
in X/Y
N530 G00 Z160 Run up Z axis
N535 M30
5–56 © Siemens AG 1990 All Rights Reserved 6FC5197- AB70
SINUMERIK 840/850/880 (BN)
To Next Page
Loading...
