Siemens SINUMERIK 840 User Manual

Introduction 1
Defining Parameters 2
Measuring Cycle Auxiliary Programs 3
Measuring Cycles for Turning Machines 4
Measuring Cycles for Milling Machines and Machining
Centres
5
Measuring Cycles for Turning and Milling Work 6
Measuring in JOG Mode
(SINUMERIK 880/880 GA2)
7
Automatic Workpiece Measurement in JOG Mode
(SINUMERIK 840 SW2)
8
Alarms 9
Lists 10
Abbreviations 11

Siemens SINUMERIK 840 Specifications

General

Control Type	CNC
Axes	Up to 31
Display	TFT color display
PLC	Integrated
HMI	SINUMERIK Operate
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Type	CNC system
Programming Languages	G-code
Max Number of Channels	10
Operating Temperature	0 to 45 °C
Relative Humidity	Up to 95% (non-condensing)
Protection Class	IP54 (front panel)