Workgroup Capacity
Exceeded
The number of cardholders in the area from
a Workgroup has exceeded the maximum for
that Workgroup.
Workgroup Capacity Not
Full
The number of cardholders in the area from
a Workgroup has not reached the maximum
for that Workgroup.
The number of cardholders in the area from
a Workgroup is zero.
The area is no longer empty.
Workgroup Capacity Not
Empty
The number of cardholders in the area from
a Workgroup is no longer zero.
The bus is communicating with the server.
The bus is not communicating with the
server.
The communication link between the camera
switcher and the monitor has been restored.
The communication to the camera is
operating normally.
The camera has acknowledged that there is
movement in the area and has raised a
normal alarm.
The communication link between the camera
switcher and the monitor has been lost.
The camera has detected movement and
has raised an alarm.
The device has re-established
communication with the server.
The device has lost communication with the
server.
Door Interlocking is enabled.
Door Interlocking is disabled.
Door Interlocking is in an alarm state.
The flag has been set to false
The flag has been set to true
The floor has been secured.
The Floor has been temporarily secured.
The Floor has been unsecured
The Emergency Stop Button inside the
elevator has been activated.
The Floor has been temporarily unsecured.
The group is in a normal state.
The group is in an alarm state. The group
alarm conditions are established in the
Group
dialog.
To Next Page
Loading...
