Siemens SiPass integrated

Host event tasks
Sources
7
A6V11144326
29 | 66
Source
State (trigger)
Description
Intrusion Control
Enabled
Intrusion Control has been enabled at the access
point.
Invalid
A host event task is triggered when a point
enters any alarm state, assuming that an alarm
class has been configured for the access point.
Invalid Dual Custody
An Invalid Dual Custody event has occurred.
No Entry
A host event task is triggered if the access point
is set to “De-layed Reporting” mode and a valid
card has been badged at a reader, but the door
monitor has not registered passage through the
door.
Operator Alarm
A host event task is triggered when the
nominated access point goes into alarm.
Operator Alarm
Actioned
A host event task is triggered, when an alarm
associated with the nominated access point, is
actioned by an operator.
Operator Alarm Not
Actioned
A host event task is triggered when the operator
fails to action an alarm associated with the
nominated access point before the (re-activation)
timeout.
Operator Alarm
Timed out
A host event task is triggered when the operator
fails to action the alarm associated with the
access point and the alarm time-out.
Operator Normal
A host event task is triggered when the
nominated access point changes to a normal
state.
Operator Restore
A host event task is triggered when the
nominated access point attains ‘Restored’ status.
Operator Waiting for
Normal
A host event task is triggered when a restorable
alarm at the nominated point has been ac-tioned
but has not returned to its normal state.
PIN Error Disabled
A card has been voided after the cardholder has
made three consecutive incorrect PIN entries in
the facility.
Reader Offline
A host event task is triggered when a reader
enters the offline state. Only valid for the
Siemens reader range.
Reader Online
A host event task is triggered when a reader
enters the online state. Only valid for the
Siemens reader range.
Reader Tamper
A host event task is triggered when a reader
enters the tamper state (tamper input activated).
Only valid for the Siemens reader range.
SALTO Battery Low
A SALTO offline door requires a battery change.
SALTO PPD
Connection
A PPD has been connected to a SALTO offline
door to update the door.
SALTO System
Offline
SiPass integrated is not connected to the SALTO
System.
SALTO System
Online
SiPass integrated is connected to the SALTO
System.