Siemens SiPass integrated

Host event tasks
Sources
7
30 | 66
A6V11144326
Source
State (trigger)
Description
Self Authorization
Granted
Cardholder has self-authorized on a Dual
Custody access point.
Soft Perimeter
Violation
An anti-passback violation has occurred at a
door under soft anti-passback control.
Time Schedule
Violation
A host event task is triggered when a card is
presented at a reader outside the cards pro-
grammed time schedule for that reader/door.
Timed Re-Entry Error
A cardholder has attempted to re-enter an area
(set to Timed Re-Entry Anti-Passback mode)
before their permitted re-entry time.
Turnstile in Use-
Readers Disabled
A cardholder has been denied access at a
turnstile due to the turnstile being already in
used by another cardholder.
Valid
A host event task is triggered when the point is
returned to any restore state, assuming an alarm
class has been con-figured for the access point.
Valid Card Presented
A host event task is triggered when a valid card
is presented at a reader at a delayed reporting
mode reader.
Void card
A host event task is triggered when a card that is
void is swiped at a card reader.
Access Point
Group
Same as Access
Points with less
“States” options
See above
Anti-Passback
Area Point
Area Count Reset
An Area count has been reset.
Area Mode Changed
An Area mode has been changed.
Capacity Empty
The area is vacant.
Capacity Exceeded
An event task is triggered when the count for the
number of cardholders currently in the anti-
passback area is above the specified capacity.
Capacity Full
An event task is triggered when the count for the
number of cardholders currently in the anti-
passback area has reached the specified
capacity.
Capacity Not Empty
The area is no longer empty.
Capacity Not Full
The number of cardholders in the area does not
exceed the defined maximum.
Same as Access
Points
See above.
Workgroup Capacity
Empty
The number of cardholders in the area from a
Workgroup is zero.
Workgroup Capacity
Exceeded
The number of cardholders in the area from a
Workgroup has exceeded the maximum for that
Workgroup.
Workgroup Capacity
Full
The number of cardholders in the area from a
Workgroup has reached the maximum for that
Workgroup.
Workgroup Capacity
Not Empty
The number of cardholders in the area from a
Workgroup is no longer zero.