Siemens SiPass integrated

Host event tasks
Sources
7
A6V11144326
31 | 66
Source
State (trigger)
Description
Workgroup Capacity
Not Full
The number of cardholders in the area from a
Workgroup has not reached the maximum for
that Workgroup.
Anti-Passback
Area Point
Group
Same as Access
Points
See Above
Apogee Control
Trig. ID
A host event task is triggered when a message is
received from the Apogee Control corresponding
to the Apogee Trigger ID.
Bus Driver
Bus Driver Alive
A host event task is triggered when the bus
driver operating the CCTV interface is restored.
Bus Driver Down
Driver A host event task is trig-gered when the
bus driver operating the CCTV interface goes
down
Camera Point
Acknowledged
The link between the camera switcher and the
monitor is working.
Motion Alarm
A motion alarm has been gener-ated by the
camera.
Motion Normal
A motion normal has been generated by the
camera.
Video Loss
A host event task is triggered when the live video
feed from a camera has been lost.
Video Normal
Video feed from the camera is restored.
Camera Point
Group
Alarm
A host event task is triggered when a camera
point group enters the alarm state.
Normal
A host event task is triggered when a camera
point group returns to the normal state.
Database
Database
Synchronization
failed
A host based event task is triggered when the
database synchronization process has failed.
Database
Synchronization OK
A host based event task is triggered when the
database synchronization process has
succeeded.
Door Interlocking
Interlocking Alarm
Door Interlocking alarm state.
Interlocking Disabled
Door Interlocking is disabled.
Interlocking
Operational
Door Interlocking is enabled.
External Point
Acknowledged
An event is triggered when an external point is
acknowledged at the originating server.
Alarm
An event is triggered when an External point
(source point or area node) enters an alarm state
and that information is sent to SiPass integrated
by the exter-nal application.
Normal
An event is triggered when an External point
(source point or area node) enters a normal state
and that information is sent to SiPass integrated
by the exter-nal application.
Floor Point
Alarm
An alarm state has been reported by the floor.