Siemens SiPass integrated

Controller Event Tasks
Sources
8
A6V11144326
45 | 66
Type
State (trigger)
Description
Audit Trail Enabled
An event task has been triggered when a
controller event task is triggered when Audit
Trail reporting from the ACC to the Server is
enabled.
Audit Trail Full
An event task has been triggered when a
controller event task is triggered when the
Audit Trail log on the ACC is full.
Battery Fail
An event task has been triggered when a
controller event task is triggered when the DC
backup battery connected to the ACC fails.
Battery Low
An event task has been triggered when a
controller event task is triggered when the DC
backup battery connected to the ACC is
operating at a critically low level.
Battery OK
An event task has been triggered when a
controller event task is triggered when the DC
backup battery connected to the ACC is
restored.
Network
Communications
Failed
An event task has been triggered when the
communications between the SiPass
integrated Server and a controller has been
lost.
Network
Communications OK
An event task has been triggered when the
communications between the SiPass
integrated Server and a controller has been
restored.
Tamper Active
An event task has been triggered when the
tamper input to the ACC registers an alarm.
Tamper Normal
An event task has been triggered when the
tamper input to the ACC registers returns to a
normal state.
Unit Reset
An event task has been triggered when the
ACC has been reset.
Device
Battery Fail
An event task has been triggered when the DC
backup battery connected to the selected
device fails.
Battery Low
An event task has been triggered when the DC
backup battery connected to the selected
device is operating at a critically low level.
Battery OK
An event task has been triggered when the DC
backup battery connected to the selected
device is restored.
Battery Present
An event task has been triggered when the DC
backup battery connected to the selected
device is recharging.
Invalid Card
Technology selected
An event task has been triggered when a card
technology has been selected that is
incompatible with the reader connected to a
Reader Interface Unit.
Offline
An event task has been triggered when
communications between the device and the
ACC are disabled.