Siemens SiPass integrated

Controller Event Tasks
Sources
8
48 | 66
A6V11144326
Type
State (trigger)
Description
Exit Delay Timer
Started
An event task will be triggered when the exit
delay timer has started.
Normal
An event task will be triggered when the
intrusion area enters the normal state.
Part Armed
Intrusion Area has been Part Armed.
Part Armed B
Intrusion Area has been Part Armed B. (SPC
only)
Keypad
Standard Event
An event task is triggered when the “enter” or
“#” key has been pressed at an access point
with a keypad.
Output Point
Locked
Output point has been locked.
Unlocked
Output point has been unlocked.
Reader
Smart Card Event
An event task is triggered when an event task
is triggered when a MIFARE smart card has
been badged at an access point.
Standard Card Event
An event task is triggered when a standard
access card (non-smart card) has been
badged at an access point.
Time Schedule
End
An event task is triggered when the selected
Time Schedule ends.
Start
An event task is triggered when the selected
Time Schedule begins.
Start and end
An event task is triggered when the selected
Time Schedule begins, and again when it
ends.