Siemens SITRANS 7ML5830-2AH - Programmer Overview; Hazardous Area Installations

Introduction
1.2 Introduction
Intrinsically Safe handheld programmer
6 Compact Operating Instructions, 05/2019, A5E32280389-AB
1.2
Introduction
The programmer is a sturdy, hand-held, programming unit offering immediate access to the
configuration parameters for Siemens products. Point the programmer at the instrument’s
display window and press the buttons in the required sequence. Consult individual product
manuals for operation distance limits. The programmer is used with the following Siemens
products:
● SITRANS LR200
● SITRANS LR250
● SITRANS LR260
● SITRANS LR400
● SITRANS LR460
● SITRANS LR560
● SITRANS Probe LR
● SITRANS Probe LU
①
Numeric and auxiliary keys
②
Function keys
1.3
Instructions Specific to Hazardous Area Installations
(Reference European ATEX Directive 2014/34/EU, Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number SIRA
01ATEX2147:
1. The equipment may be used with flammable gases and vapours with apparatus group
IIC, IIB and IIA and temperature classes T4, T3, T2 and T1.
2. The equipment may be used in zone 20 areas and also in areas requiring Ga equipment.
3. The equipment may be used with combustible dusts with a smouldering temperature of at
least 200 °C.