Siemens SMG 71 - User Manual

A
B
B4+
B3
B2
B1-
A B
Q
W
E
R
T
Y
U
I
O
{
}
P
S4
S3
S5
ST1
S1
S2
2
3
4
+5
-6
B3
B2
B1-
-7
+8
B4+
1
12
11
S6
18
17
16
15
14
13
10
+9
4
2
1
-
3
2
-
1
26
25
24
23
22
21
20
19
q
e
r
t
w
y
u
i
o
p
8AA11448 - E0 - 11/03/2002 - UK - SNR 811448.0-001
Fig. 1
1. Product Description
The Card reader Gateway SMG 71 replaces one standard
transponder (SMT 12) and Mirrors a Keypad with the same
address. 2 cardreaders may be connected for door opening/
closing and setting/unsetting.
2. Supply package
The SMG 71 package contains the following:
- One circuit board SMG 71
- 6 mounting studs
- 8 terminating resistors (4.7 kOhm)
- One SLG 71 language kit
3. Mounting Instructions
The SMG 71 is designed for mounting inside a remote power
supply or other suitable box, within a dry room.
It must not be exposed to either dripping or splashing water.
3.1 Product overview (fi g. 1)
- Q Switch for the «auto shunt» function
- W Switch for the type of reader
- E Addressing button
- R Thermofuse 12 V; 650 mA
- T Plug connector for external tamper contact
- Y Tamper contact
- U Switch for programming glass breaks alarm inputs
- I Stand alone Input
Embedded Transponder:
- O 4 programmable inputs (1 to 4)
- P Open collector output 2
- { Relay output 1
Open collector outputs with dedicated functions:
- } Auto shunt function running
- q Cannot set
- w Set/Unset
- e Buzzer
- r Alarm in memory
- t Error information
(site code not programmed/parity error/E-Bus failure)
- y 12 V power supply for outputs
- u E-Bus connection
- i 12 V power supply for card reader
- o Connection to card reader 2
- p Connection to card reader 1
3.2 Fit circuit boards (fi g. 2)
1 - Engage the mounting studs (provided with the circuit
boards) in the holes provided (A).
2 - Fit circuit boards .
4. Wiring
4.1 E-Bus (fi g. 3)
The E-Bus (A) must be connected to the central control unit (B1-,
B2, B3, B4+). It may be routed in parallel to other accessories
(B). For additional information see the Control panel installation
manual.
Fig. 2
Fig. 3
Ward status
information of
mirrored keypad
}
s
Installation instructions
SMG 71
SLG 71 UK 20 800 650.0-010

Siemens SMG 71 Specifications