Need help?Do you have a question about the Siemens Gigaset SE568 Series and is the answer not in the manual?
General| Series | Gigaset SE568 |
|---|---|
| Frequency Band | 2.4 GHz |
| Encryption | WEP, WPA, WPA2 |
| DECT Base Stations | 1 |
| DECT Handsets | Up to 6 |
| Wireless Standard | 802.11b/g |
| Ethernet Ports | 4 |
| USB Ports | 1 |
| Security | WPA, WPA2 |
| ADSL Standard | ADSL, ADSL2, ADSL2+ |
| Connectivity | Wireless |
Details on Ethernet switch, DHCP server, status/statistics, and USB connection.
Information on password protection and NAT protection for network security.
Firewall functionality for monitoring and filtering incoming data packets.
Details on DMZ, Firewall Snooze, Content Filter, Time of Day restrictions.
Specifies hardware and software requirements for installing the Gateway.
Lists all items included in the Gigaset Residential Gateway package.
Familiarization with the Gateway's physical components before installation.
Explanation of the status indicators on the Gateway's front panel.
Description of the ports and buttons on the Gateway's rear panel.
Important safety precautions to observe when using the Gigaset Gateway.
Lists essential system requirements for Gateway installation.
Step-by-step guide for installing the Gateway, including connecting cables and rebooting.
Instructions for installing in-line and wall-mount filters for DSL connection.
Details on connecting the Gateway via Ethernet or USB, including DSL and power.
Steps to connect and install the Gateway using USB on Windows.
Instructions for installing USB drivers for the Gateway on Macintosh.
Verifying TCP/IP settings are correctly configured for Gateway communication.
Detailed steps to check TCP/IP settings for Windows 9x/ME.
Detailed steps to check TCP/IP settings for Windows 2000.
Detailed steps to check TCP/IP settings for Windows XP.
Steps to verify TCP/IP settings on MAC OS 8.6-9.x.
Steps to verify TCP/IP settings on MAC OSX.
Procedures for configuring Windows 9x/2000 and Windows XP for Internet access.
Prerequisites and checks before starting the Gateway configuration process.
Methods to connect to the Gateway using UPnP or a web browser.
Step-by-step guide for the initial Gateway configuration using the Setup Wizard.
Setting the time zone for parental controls and accurate time synchronization.
Basic configuration for wireless network, including SSID and channel selection.
Setting up wireless security levels like WEP and WPA.
Detailed steps for configuring WEP 64-bit encryption for wireless security.
Detailed steps for configuring WEP 128-bit encryption for wireless security.
Detailed steps for configuring WPA-PSK security for wireless networks.
Overview of the Gateway's home window, menu bar, and toolbar.
To Next Page