Need help?Do you have a question about the Siemens SIMATIC PN/M-Bus LINK and is the answer not in the manual?
Introduction to the operating instructions and their purpose.
Information on supplementary documents and naming conventions used.
General safety instructions, intended use, and warnings for installation and operation.
Guidelines for system security, cyber threat protection, and specific IT security measures.
Description of the PN/M-Bus LINK's function as a communication gateway.
Details on the general and M-Bus specific functionalities of the device.
Basic system configuration showing the PN/M-Bus LINK's integration.
List of necessary hardware and software components for device operation.
Arrangement of connection and display elements on the PN/M-Bus LINK device.
Methods for transferring data between the S7 controller and M-Bus devices.
Tools and methods for isolating the cause of device or system faults.
General and specific guidelines for mounting and connecting the device.
Guidance on selecting the site, mounting positions, and ambient conditions.
Conditions for safe transportation, storage, and items included with the device.
Step-by-step instructions for mounting the device on a rail or control panel.
Essential safety precautions for connecting power and communication interfaces.
Details on electrical connections, voltage, and current consumption.
Specific steps for connecting the 24 V DC power supply to the device.
Guidance on establishing a proper functional ground connection for EMC.
Instructions for connecting the device to the PROFINET network.
Instructions for connecting the device to the M-Bus.
Procedure for setting up and activating the device using TIA Portal.
General steps involved in configuring the device via TIA Portal.
Using the TIA Portal environment to integrate and configure the device.
Steps to add and set parameters for M-Bus devices in the project.
Verifying and finalizing the project configuration before download.
Description of the LEDs on the device for indicating operational status.
Meaning of LEDs related to device operation and PROFINET status.
Interpreting the RUN and ERR LEDs for M-Bus connection status.
Interpreting the LINK and Rx/Tx LEDs for Ethernet interface status.
Information on diagnostic messages sent to the S7 controller.
Details on diagnostic events, their messages, and possible remedies.
Information on the status byte in the cyclic IO image for error detection.
Procedure for updating the device's firmware.
How to restore the device to its default factory configuration.
Steps for safely removing and installing a replacement device.
Guidelines for environmentally friendly recycling and disposal of the equipment.
Detailed technical data, electrical and physical parameters of the device.
Visual representation of the device's physical dimensions and measurements.
Information on product certifications and compliance with EC directives.
Contact details for Siemens support and general inquiries.
Information regarding the use of open source software licenses.
Overview of available support services and resources.
Contact information for direct technical assistance.
Accessing online resources, documentation, and support requests.
Information on finding and purchasing Siemens products.
To Next Page
General