Siemens SIMATIC PN/M-Bus LINK User Manual

PN/M-Bus LINK
Operating Instructions, 03/2018, A5E44260928-AA
54
Appendix
A
A.1
Certificates and approvals
Note
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted
for your product by the
markings on the type plate.
CE marking
The SIMATIC PN/M-Bus LINK device fulfills the requirements and protection objectives of
the following EC directives.
EMC Directive 2014/30/EU
The product is designed for use in the following areas:
● Residential areas in accordance with EN 61000-6-3
● Industrial area according to EN 61131-2 (programmable controllers)
EMC requirements:
Field of application
Noise emission requirements
Interference immunity requirements
Residential area
EN 61000-6-3
--
Industrial area
EN 61000-6-4
EN 61000-6-2
The product meets these requirements if you adhere to the installation guidelines and safety
instructions described in these operating instructions and in the System Manual for the
S7-1200 Automation System
(https://support.industry.siemens.com/cs/ww/en/view/109741593).

Siemens SIMATIC PN/M-Bus LINK Specifications

General

Brand	Siemens
Model	SIMATIC PN/M-Bus LINK
Category	Gateway
Language	English