Application planning
5.2 Installation location
PN/M-Bus LINK
20 Operating Instructions, 03/2018, A5E44260928-AA
Installation location
Selection of the installation site / installation
You can mount PN/M-Bus LINK either on a control panel or on a standard mounting rail:
Installation in control cabinet / device connection box
The device is intended for installation in a control cabinet or in a device connection box.
It is important to note that installation in a control cabinet or device connection box is
essential for compliance with the UL regulations.
The control cabinet / device connection box must satisfy the regulations regarding fire-
protection housing.
Ensure that all cables and leads that protrude externally are equipped with adequate strain
relief.
To Next Page
Loading...
