PN/M-Bus LINK
Operating Instructions, 03/2018, A5E44260928-AA
7
Observe the safety instructions on the inside front cover of this documentation.
SIMATIC M-Bus LINK devices adhere to the approvals printed on the nameplate. If you have
questions about whether it is permissible to install the device in the planned environment,
please contact your service representative.
Alterations to the devices are not permitted.
Failure to observe this requirement shall constitute a revocation of the CE approval and
manufacturer's warranty.
PN/M-Bus LINK may only be used for the applications specified in the catalog and the
corresponding technical documentation. If the device is used in a manner other than the
one specified by Siemens, the protection offered by the device might be impaired.
See also the section "Legal notices" at the beginning of this manual.
The device contains no user-serviceable parts.
May cause death or serious injury
Unauthorized opening or improperly performed repairs can cause considerable damage to
property and/or danger to users. Contact Siemens Support
(http://support.automation.siemens.com) in case of error.
To Next Page
Loading...
Need help?
General