Siemens SIMATIC PN/M-Bus LINK - Safety Information; General Safety Information

PN/M-Bus LINK
Operating Instructions, 03/2018, A5E44260928-AA
5
Introduction
1
1.1
Preface
Purpose of this documentation
These operating instructions contain all the information required for configuring, installing,
commissioning and operating the PN/M-Bus LINK.
These operating instructions are intended for qualified personnel in the following target
groups:
● Commissioning engineers
● Operating and service personnel
● System integrator
Knowledge required
The following knowledge is required in order to understand the operating instructions:
● Knowledge of programming a SIMATIC S7 controller
● Knowledge in the application of the TIA configuration environment
● Knowledge of working with the PROFINET fieldbus
● Well-founded knowledge in the M-Bus communication protocol
● General knowledge in the field of automation technology
● General knowledge of communication networks
Trademarks
SIMATIC
®
is a registered trademark of Siemens AG.
History
Edition
Remarks
03/2018 First edition