Water softening system/special salt en
19
Deactivating energy manager
„
Deactivating energy manager
The menu option “Disconnect with +” is
available when the dishwasher is
connected with the energy manager of
the home system.
This is how to deactivate the energy
manager:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button {8 for 3
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )R until the
required setting is indicated on the
display window at the top @.
5. Make the setting with setting buttons
+ - `.
6. Press Info button { 8 for 3
seconds.
At the end of this process the energy
manager is deactivated. A new energy
manager can now be connected.
Declaration of Conformity y
Declaration of Conformity
BSH Hausgeräte GmbH hereby
declares that the appliance which
features Home Connect is in
accordance with the basic requirements
and the other relevant provisions of the
directive 1999/5/EC. A detailed R&TTE
Declaration of Conformity can be found
on the Internet at
www.siemens-home.com on the product
page of your appliance with the
additional documents.
+ Water softening
system / special salt
Water softening system/special salt
To ensure good rinsing results, the
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l) must
be softened. The water is softened with
special salt (regeneration salt) in the
water softening system
of the dishwasher. The setting and
therefore the required amount of salt
depends on the degree of hardness of
your tap water (see following water
hardness table).
Water hardness table
:L)LLVDUHJLVWHUHGWUDGHPDUN
RI:L)L$OOLDQFH
:DWHU
KDUGQHVV
YDOXH(
VRIW
PHGLXP
KDUG
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
PPROO
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
6HWYDOXH
RQWKH
PDFKLQH
+DUGQHVV
UDQJH
KDUG
KDUG
PHGLXP
PHGLXP
VRIW
To Next Page
Loading...
