Siemens SQL321B Series - Page 6

6 / 12 2022-06-15 M4520 74 319 0809 0 Siemens Smart Infrastructure
Calibration Actuator / 执行器校准
SQL351B150..6000
SQL361B150..6000
Signal type Selection 0..10V and 4..20 mA signal / 信号类型选择 0..10V 和 4..20 mA
en
• Factory setting for input and output signal in SQL361B.. is 0..10 V.
• Factory setting for input and output signal in SQL351B.. is 4..20 mA.
*Fail-in position not available at input signal 0..10 V.
• Select switch as below description.
zh-cn
• SQL361B..输入和输出信号的出厂设置..是 0..10 V
• SQL351B..输入和输出信号的出厂设置..是 4..20 mA
*在输入信号为 0..10 V 时，无断信号保位功能
• 请按照以下说明选择拨码开关位置。
en
zh-cn
Signal
Output signal
Input signal
信号
输出信号
输入信号
S3
S2
S3
S2
0-10 V
0-10 V
2-10 V
2-10 V
4-20 mA
4-20 mA
W1, 20 mA calibration potentiometer
/ 20 mA 校准电位 计
S1 One-key calibration,
/一键 校准
S Selection of Input Signal Types.2,
/ 选择输入信号 类型
S Signal loss mode settings4,
/ 信号 丢失 模式 设置
S Selection of Feedback Signal Types (0-10V 2-10V 4-20mA) 3,
/ 选择反馈信号类型 (0-10V 2-10V 4-20mA)
LED D3