To Next PageTo Next Page
Need help?Do you have a question about the Siemens SQM5 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | SQM5 |
| Category | Controller |
| Language | English |
General description of SQM5... reversing actuators for rotary motion control applications.
Highlights of the SQM5... actuators including accuracy, switches, and mounting flexibility.
Details suitability for industrial process and commercial burner applications, enhancing performance.
Table 1 lists product numbers for pre-assembled UL/CSA/CE-approved SQM5... actuators.
Lists part numbers for electronic circuit boards, shafts, mounting brackets, and potentiometers.
Explains the coding system for SQM5... actuator product numbers, detailing family, torque, voltage, etc.
Step-by-step guide for installing the actuator shaft, including parts like washers and C-clips.
Explains factory configuration for clockwise/counterclockwise rotation and field reversal.
Describes base mounting and face mounting methods for SQM5... actuators.
Details factory settings and adjustment of limit and auxiliary switches using cam drums.
Provides notes on switch adjustment range dependency on potentiometer and specific model limitations.
Covers manual rotation of the shaft and alignment of the cam drum to the zero mark.
Instructions for aligning the actuator position indicating dial with the scale and pointer.
Details conduit connections, recommendations for flexible wire, and the importance of grounding.
Explains wiring connections for AGA56.1... circuit boards for manual and automatic operation.
Wiring instructions for AGA56.41/42/43... circuit boards, including caution for simultaneous power.
Illustrates the functional diagram for AGA56.4... circuit boards and their terminal connections.
Wiring procedures for AGA56.9... circuit boards, including cautions and input signal connections.
Shows the functional diagram for AGA56.9... boards and terminal configurations.
Explains how to adjust minimum (zero) and maximum (span) positions using trim potentiometers.
Details span adjustment and how switch cams and trim potentiometers determine the modulating range.
Describes features of SQM5x.xxxxxZx actuators, including input/output signals from the AGA56.9A... board.
Step-by-step instructions for installing the actuator cover securely after adjustments.
Explains how linearization minimizes flow curve characteristics for butterfly valves.
Covers overriding input signals and configuring actuators for parallel operation.
Details master/slave operation setup and split ranging capabilities using AGA56.9... boards.
Outlines input/output signals for Gx, Hx, and Kx actuator models using AGA56.4xA... boards.
Describes input/output signals for Ax actuators using the AGA56.1A97 board.
Provides instructions for reversing the actuator's rotational direction, including switch cam adjustments.
Detailed steps for reversing rotation, including potentiometer and gear adjustments.
Refers back to the initial shaft installation instructions for completeness.
Steps before installing circuit boards, including capacitor handling and bracket removal.
Guide for installing AGA56.41/42/43... circuit boards, including board separation and terminal section movement.
Details specific wire connections for AGA56.41/42/43... circuit boards to actuator terminals.
Instructions for installing AGA56.9A... circuit boards, including removing previous boards and mounting.
Specific wiring connections for AGA56.9A... circuit boards to actuator terminals and capacitor re-installation.
Final steps for AGA56.9A... installation, including L-shaped board and potentiometer connection.
Steps for installing the AGA56.1A97 circuit board and making basic connections.
Detailed instructions for removing an ASZ... potentiometer from the actuator.
Guide for installing a new ASZ... potentiometer, including alignment and wire connections.
Comprehensive technical specifications for the SQM5... Reversing Actuator, including torque, voltage, and approvals.
Details conduit connections, mounting, and specifications for AGA56.1A97, AGA56.41A..., and AGA56.42A... circuit boards.
Specifications for AGA56.43A..., AGA56.9A... circuit boards, and ASZ... potentiometers.
Provides detailed dimensional drawings of the SQM5x.xxxRxx actuators in inches and millimeters.
Shows dimensional drawings for mounting brackets AGA57.3 and AGA57.4.
Provides dimensional drawings for various AGA58 series shafts, indicating gear side measurements.
