EasyManuals Logo

Siemens SX Series Operating Instructions

Siemens SX Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Additional options en
21
Programme selection
You can select a suitable programme
according to the type of utensils and
degree of soiling.
Information for test institutes
Test institutes receive the information for
comparability tests (e.g. according to
EN60436).
These are the conditions for conducting
the tests, however these are not the
results or consumption values.
Request by e-mail to:
dishwasher@test-appliances.com
The product number (E no.) and the
production number (FD) are required
which you can find on the rating plate
9J on the appliance door.
0 Additional options
Additional options
* depending on model
Additional options can be set with
the buttons X.
Å Express WashPlus/Speed
PerfectPlus
(VarioSpeedPlus) *
Express WashPlus/SpeedPerfectPlus (VarioSpeedPlus)
This function can reduce the running
time by approx. 20% to 66%
depending on the selected rinse
programme. To obtain optimum
cleaning and drying results at a reduced
running time, water and energy
consumption are increased.
Half load
§ Half load *
If you have only a few items to wash
(e.g. glasses, cups, plates), you can
switch to “half load”. This will save
water, energy and time. It is
recommended to put a little less
detergent in the detergent dispenser
than for a full load.
μ HygienePlus *
HygienePlus
This function increases the temperatures
and retains them for an extra long time
to obtain a defined disinfection
performance. Continuous use of this
function increases the hygiene status.
This additional option is ideal for
cleaning e.g. chopping boards and baby
bottles.
Ï Intensive zone *
Intensive zone
Perfect for a mixed load. You can wash
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket is
intensified, the rinsing temperature is
increased slightly.
ï High gloss drying *
High gloss drying
By increasing the amount of water
during the rinse cycle and extending the
drying phase, stains are prevented and
the drying result is improved. There is a
slight increase in the energy
consumption. Rinse aid is
recommended for the high gloss drying
function (even when using combination
detergents).

Table of Contents

Other manuals for Siemens SX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SX Series and is the answer not in the manual?

Siemens SX Series Specifications

General IconGeneral
CategoryDishwasher
BrandSiemens
SeriesSX Series
Place Settings12-14
Delay StartYes
Child LockYes
Half Load OptionYes
TypeBuilt-in
ProgramsAuto, Intensive, Eco, Quick

Related product manuals